Where is the best Refractories used in steel plants?

Gita Refractories is a leading Refractories used in steel plants provider and a high-quality castable and refractories brick manufacturer.

Headquartered in Bangalore, Gita Refractories active in many localities, adding strategic value to the largest industrial Groups worldwide. Established in 1991, Gita Refractories has over 20 years experience supplying refractory solutions to the iron, non-ferrous and steel industries.

Refractories used in steel plants

 

The regular sorts of these arranged apparatuses work undertaking off power, and agent warmth can vary from its briefest to highest) That's the reason the obstinate materials are required to hold out high temperatures over these temperatures.

What might a refractory need?

The requirements to it can be-

1) It should know for both the accomplishment and criticism of metal which is taken out from the furnace, hot exhaust and rough bilge water erosion;

2) The amazingness of it to subsist load at conservation settings to its maximum; 

Label: Refractory for Refinery in India, Refractory for Steel industry, Refractory for the cement industry,  Refractory Manufacturers. 

Contact us:

Website: http://www.gitarefractories.in

Method of manufacture of Refractories for steel industries | Gita Refractories

Gita Refractories is the leading player and pioneer in  Refractory for Refinery in India. we offer all type of Refractory for steel, cement Industry, alumina, constable, silica bricks.

Refractory for Steel industry

Refractory for Steel industry

Method of manufacture of refractories-

• Grinding
• Mixing
• Moulding
• Drying
• Firing

Grinding:-  

Grinding is a huge and diverse area of manufacturing and toolmaking. In these step raw material grind to a fine powder using a grinder.

Mixing:- 

After grinding two or more powdered raw materials are thoroughly mixed with a suitable binding material, which makes moulding easier.

Moulding:- 

Hand Moulding manufacturers refractories of low strength and low density. Mechanical Moulding manufacturers refractories of high strength and high density.

Drying:- 

This method is used to the moisture from refractories.

Firing:- 

Firing is done at a high temperature which carried out in kilns.

Label:

Refractory Manufacturers, Refractories for cement industry Refractories used in steel plants Refractory for Steel industry

Contact us: 

Website: http://www.gitarefractories.in

Registered and Corporate Office:

105, “RR TAKT”, 37,

Bhoopasandra Main Road,

Bangalore-560094

Phone : +91.80.40620000

Fax : +91.80.40620008

How to become better with Refractories for cement industry in 10 minutes.

Gita Refractories produces Refractory For Cement Industry in Bangalore

The production of refractories has been the major trend in Cement industry, this technology of production is that kind of technology which consists of the conversion of metals into oxides, at the time where the used coal oxidization heat influences up to1500℃, this kind of excessive heat have need of special kiln refractories.

 Refractories for cement industry

The function of Refractories in cement kiln.

•      To evade excessive heatness furnace projectile distortion.
•    Decreasing loss of heat during firing to avoid the effect of the clinker to the kiln directly abrasion.
•      Prevent chemical attack.

We Gita Refractories are dealing with Refractories for cement industries.

Gita Refractories prepare for ourselves a good, place in both the gyrating heater coating, plus the coating in the greater endurance stagnant pinpointed zones that incorporate a contemporary calcinertan door assembly.

The strength of the pivoting heater block covering more often than not decides the span of a furnace working effort. While extraordinary endeavors are made to guarantee suitable hard-headed block materials determination, establishment, organization (zoning) and the improvement of the furnace light-up, it is fundamentally the nature and solidness of the resulting oven task that impacts turning oven lining life.

Label: Refractory for Steel industry, Refractory for cement industry, Refractories for steel industries, Refractories used in steel plants, Refractory Manufacturers, Refractory in India.

Registered and Corporate Office:

105, “RR TAKT”, 37,
Bhoopasandra Main Road,
Bangalore-560094
Phone : +91.80.40620000
Fax : +91.80.40620008

Factory:

#18, KIADB Ind. Area Hoskote – 562 114 Bangalore Dist.
E-mail: sales@gitarefractories.in

Contact us: 

Website: http://www.gitarefractories.in

Turn Your Alumina Brick Manufacturers For Ferro Alloys Into A High Performing Machine

Gita refractories is the of Alumina Bricks manufacturer for Ferro Alloys.

High Alumina Bricks Manufacturers

We are the best suppliers plus the manufacturers of a high-class variety of Alumina Bricks for Ferro Alloys in PAN India and at international level. Our products are tested on the basis of quality and diversity of Alumina Bricks for Ferro Alloys have bodily and biological attributes, which is causing them to be extensively appropriated in disparate manufacturing units.

Applications:

• ·        Crystaland glass manufacturing
• ·        ComcastFactories
• ·        ProgressingMortars
• ·        Automobile components industry
• ·        Manual tool manufacturing Unit
• ·        Reservoirs
• ·        Blast furnace
• ·        Building elements

Alumina bricks are some kind of refractory materials containing 50% of Alumina Oxide. They are belonging to the class of unbiased refractory materials. The bricks primarily contain bauxite and different kind of mineral deposits containing core alumina and in the process, it's being heated again and again till it gets molded into that brick shape. They are having a great thermal solidity, then having a high temperature of 1800℃. Those Bricks are mainly used as coatings to make an electric iron furnace, glass kiln or rotary kiln.

Properties:

• 1.     Alumina Bricks are some advanced refractory materials which can be heated up to 1800 ℃. Above this point, it would be a substance reaching the melting point.
• 
  
• 2.     This product seems very much unbiased, as it reacts both with acidic materials as well as alkali materials.

We have categorized alumina bricks used for ferrous alloys as ordinary alumina bricks, high-density alumina bricks, low density alumina bricks and the like. 

Label: High Alumina Bricks Manufacturers, High Alumina Bricks Manufacturers in India, High Alumina Bricks Supplier.

Registered and Corporate Office:

105, “RR TAKT”, 37,
Bhoopasandra Main Road,
Bangalore-560094
Phone : +91.80.40620000
Fax : +91.80.40620008

Factory:

#18, KIADB Ind. Area Hoskote – 562 114 Bangalore Dist.
E-mail: sales@gitarefractories.in

Contact us:

Website: http://www.gitarefractories.in

How To Turn Dense Alumina Bricks Supplier Into Success

Gita Refractories are the No. 1 Dense Alumina brick suppliers  in all over India

Dense Alumina Bricks Supplier

Gita Refractories has been producing Dense Alumina Brick and manufacturing them for material purposes. The bricks are being rummage held for furnace construction purposes and the construction is applicable to all areas. They can be heated in the incinerators and blast furnaces up to 2000 degrees Celsius. The main properties for which they are much sought after are as follows.

1.     They have got that stability in all the four sturdy dimensions of the brick.

2.     Great thermal shock resistance.

3.     Resistivity to acids and many more toxic components

4.     It can be very well used in a wide variety of applications.

5.     Great work of finishing.

When these dense bricks are created, these are typically parch-milled or pre-obtained with the help of some form by opening apart. In case of little bits and pieces, they are either compressed or shaped. Our Dense Refractory Bricks are being rummage-held in most of the manufacturing workshops with great temperature environment, because of their extraordinary feasible attributes. Whether it has its combination with solid, liquid and gaseous state.

We offer our bricks which are very well tested and are therefore the perfect option on which the purchasers could easily rely on. 

Label: Dense Alumina Bricks Supplier in India, Dense Alumina Bricks, Dense Alumina Bricks Manufacturers, Dense Alumina Bricks Manufacturers in India 

Contact us:

Website: http://www.gitarefractories.in

REFRACTORY MANUFACTURERS : An Incredibly Easy Method That Works For All

Gita Refractories is one among the top Refractory Manufacturers in the country providing total refractory solutions for Steel, Cement & Mineral Processing Industries like Iron Ore Pelletization and Lime Industry.

Refractory Manufacturers

    

Refractories were born to replace construction bricks in furnaces. Furnace manufacturers and users were extremely happy to get such material.

Thus at the outset of the better half of the last century Refractory specifications were made in countries like Germany and England.

At that point, the cost-to-price ratio was too low so the technocrats concerned used on top of 200th safety. The fundamental reasons for this were:

The testing facility for the materials wasn't adequate at the customers’ end.

Refractory value has therefore stripped a region of the full project value / total operating cost that worth of refractories was never an element.

Raw materials were abundantly obtainable at throwaway costs as a result of there have been not many people to buy them. The technology was limited.

Label: Refractory for Steel industry, Refractory for cement industry, Refractories for steel industries, Refractories used in steel plants,  Refractory in India.

Contact us: 

Website: http://www.gitarefractories.in/

The Ultimate Deal On RAMMING MASS MANUFACTURERS

-Ramming Mass Manufacturers

Product Description:-

Customers can avail from us a qualitative range of Magnesite Ramming Mass. Offered ramming mass is manufactured by our expert professionals using the excellent quality raw material in compliance with the industry laid standards & norms. These type of Ramming mass products are extremely appropriate for the instruction kills.

Following would be called the‘outstanding’value qualities of these ramming mass:

• ·   Better functionality – It has such a great functionality none of the monolithic or refractory components would have.
• ·        Lengthier covering & strengthening lifecycle
• ·        Precise structure: The structure looks cool on all aspects
• ·        Clarity: More clarity in the concept of the product.

Ramming Mass Manufacturers 

We greatly deal contribution in a soft skills range of Straightforward Ramming Mass Manufacturers for our clientele. Manufactured using best quality basic data and newest skill in agreement with the clear manufacturing values, offered ramming mass is extensively used for lining the induction furnaces to prevent from the Corrosion Erosion. Obtainable ramming mass is presented along with us at business leading charges.

We as a responsible Industry for refractories vouch for operating our Ramming Mass Manufacturers in India and that would be worth a decent player with its extended coating life along with a reduced cost of production.

Label: 

Ramming Mass Manufacturers in India,  Ramming Mass Suppliers  REGISTERED AND CORPORATE OFFICE: 105, “RR TAKT”, 37, Bhoopasandra Main Road, Bangalore-560094 Phone : +91.80.40620000 Fax : +91.80.40620008 FACTORY: #18, KIADB Ind. Area Hoskote – 562 114 Bangalore Dist. E-mail: sales@gitarefractories.in Contact us:  Website: http://www.gitarefractories.in

Where Can You Find MAGNESITE BRICKS FOR STEEL PLANT Resources

Gita Refractories, one of the largest refractory based systems in India, is one of the distinguished manufacturers and exporters of a quality range of Magnesite Bricks for steel plant. Our quality-tried Magnesite Bricks are generally recognized by the customers in India and abroad, attributable to their unrivaled properties and productive execution. These Magnesite Bricks are extraordinarily structured so as to meet different necessities of the customers.

Magnesite bricks for steel plant

Our offered items are very refreshing in the market attributable to their low upkeep, impeccable completing and durability. Since our initiation, we have been serving the best scope of refractories and united administrations for variegated businesses.

We have a completely prepared and very much created best in class infrastructural office, which is outfitted with all the most recent machines and other marked hardware. The foundation of the organization is separated into various areas, for example, fabricating unit, quality testing unit, R&D and warehousing, and bundling unit. Aside from this, we guarantee normal supervision and strict quality checking of our items previously dispatching them to our clients.

We have been dynamic in taking into account the necessities of different ventures and supply our items to driving modern demographic based crosswise over different areas. Our solid items and administrations have made our top picks among our customers.

Label: Magnesite Brick Manufacturers,  Magnesite Brick Manufacturers in India, Magnesite Brick

Registered and Corporate Office:

105, “RR TAKT”, 37,
Bhoopasandra Main Road,
Bangalore-560094
Phone : +91.80.40620000
Fax : +91.80.40620008

Factory:

#18, KIADB Ind. Area Hoskote – 562 114 Bangalore Dist.
E-mail: sales@gitarefractories.in

Contact us: 

Website: http://www.gitarefractories.in